> For the complete documentation index, see [llms.txt](https://docs.wynta.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.wynta.com/knowledge-base/affiliate-platform/commissions.md).

# Commissions

The Commissions section allows program managers to configure, manage, and review affiliate commission structures across the program. Commissions can be set at different levels, allowing you to define commercial terms for the entire program, specific brands, individual affiliates, or individual campaigns.

Wynta supports multiple commission models, including Revenue Share, Cost Per Acquisition (CPA), hybrid deals, tiered structures, and fixed-amount commissions.

The Commissions section contains two tabs:

* All Commissions
* Pre-sets

### 1. All Commissions

The All Commissions tab is the default landing page when you navigate to Commissions. It provides a consolidated listing of all commissions configured across your program.

#### Commissions Listing

The table displays the following information:

* Commission ID — Unique identifier assigned to the commission.
* Affiliate or Campaign — The affiliate or campaign associated with the commission, depending on the level at which it is configured.
* Brand — The brand to which the commission applies, where relevant.
* Level — The level at which the commission has been configured.
* Creation Date — Date on which the commission was created.
* Commission Details — Summary of the configured commission structure.
* Start Date — Date on which the commission becomes effective, where specified.
* End Date — Date on which the commission expires, where specified.

You can also filter the listing by commission level and country.

#### Add Commission

Select Add Commission in the top-right corner to create a new commission configuration.

The form allows you to select the applicable level, define the commission model, configure its triggers and values, and specify the period during which the commission applies.

#### Commission Levels

Every commission must be assigned a level. The available levels determine which affiliates, brands, or campaigns are covered by the commission.

**Program Level**

Applies a blanket commission structure across all brands, affiliates, and campaigns within the program, subject to any more specific commission configurations that apply. Most programs set a catch-all Tiered structured commission (see below for more info) at this level to ensure all affiliates signing up are awarded at least a basic commission.

**Brand Level**

Applies to all affiliates and campaigns associated with the selected brand. Selecting this level enables the Brand dropdown.

**Affiliate Level**

Applies to the selected affiliate across the relevant program scope. If the multi-tier referral model is enabled, you can also select the applicable affiliate type.

**Affiliate + Brand Level**

Applies to a specific affiliate for a selected brand. You must select both the affiliate and the brand.

**Campaign Level**

Applies to a selected campaign associated with a specific affiliate. You must select both the affiliate and the campaign.

**Campaign + Brand Level**

Applies to a selected campaign and brand. You must select both the campaign and the brand.

The fields available in the commission form will change according to the selected level.

#### Country

You can optionally select one or more countries to restrict the commission applied on activity from players from those countries.

If no country is selected, the commission applies to players from all countries within the applicable scope.

#### Commission Dates

Configure the period during which the commission should apply.

* Start Date — Specify when the commission becomes effective. You can schedule a commission to begin on a future date.
* End Date — Specify when the commission expires.
* Apply Month to Date — Enable this option to apply the commission from the first day of the current month.

#### Pre-set

The Pre-set option allows you to select a previously saved commission configuration for the relevant level.

When selected, the available pre-sets for that level are displayed. Choosing a pre-set populates the corresponding commission configuration, reducing the need to enter the same details repeatedly.

Pre-sets are managed through the Pre-sets tab.

### Commission Types

The commission types available depend on the selected commission level. Enable the relevant commission type and complete the fields displayed for that configuration.

#### 1. Revenue Share (RevShare)

Revenue Share allows affiliates to earn a percentage of the revenue generated by the players attributed to them.

Enable the Revenue Share option and configure the following fields:

* Revenue Type — Select whether the commission is calculated on Revenue or Deposits.
* Revenue Share Percentage — Enter the percentage payable to the affiliate.
* No Negative Carryover (Ring Fence) — Enable this option to prevent negative revenue from being carried forward against the affiliate's future earnings.

**No Negative Carryover (Ring Fence)**

When enabled, negative revenue for the applicable period is neutralised rather than carried forward to reduce future revenue share earnings.

For hybrid deals, ring fencing also allows an affiliate to retain the CPA amount for which they qualify, even when revenue share is negative.

When this option is disabled, negative revenue can affect the affiliate's revenue share balance.

Select the appropriate revenue type, enter the revenue share percentage, and configure ring fencing according to your program's commercial terms.

#### 2. Cost Per Acquisition (CPA)

CPA allows affiliates to earn a fixed amount when a player meets specified acquisition criteria.

Wynta supports the following CPA criteria:

* FTD — First-Time Deposit.
* Wagering — Qualifying wagering activity.
* FTD + Wagering — A combination of both criteria.

Configure the following fields:

* CPA Criterion — Select the qualifying event.
* Currency — Select the applicable currency if multiple currencies are supported by your program.
* Baseline — Enter the minimum deposit or wagering threshold required to qualify.
* CPA Amount — Enter the amount payable for each qualifying player.

**Exclude Revenue Share for Qualifying CPA**

For hybrid deals, you can enable this option to exclude revenue share for players who qualify for the CPA commission, according to the configured rules.

**Cumulative Deposit Trigger**

Enable this option if the CPA should trigger only when a player's cumulative deposits equal or exceed the configured minimum deposit baseline.

**Capping**

The Capping feature limits the number of qualifying players for whom the commission can be triggered.

Enable capping and select the applicable period:

* Month on Month — Applies a limit to qualifying players within each calendar month.
* Lifetime — Applies a cumulative limit across the entire duration of the commission.

Enter the maximum number of qualifying players permitted under the selected cap.

#### 3. Hybrid Commissions

A hybrid commission combines two or more commission models, such as Revenue Share + CPA.

To configure a hybrid deal, enable the relevant commission types (check the box next to each of them) and complete the required fields for each.

For example, a Revenue Share + CPA deal requires you to configure both the revenue share percentage and the CPA criteria, baseline, currency, and amount.

You can also configure the applicable ring-fencing, qualifying CPA exclusion, cumulative deposit trigger, and capping options where available.

#### 4. Tiered Structure

The Tiered Structure commission allows commission rates to vary according to performance thresholds.

You can configure tiers based on:

* Revenue
* Deposits
* First-Time Depositors
* Registrations
* Active Wagering

Select the required tier type from the dropdown, then define each tier by entering its lower and upper limits and the corresponding revenue share percentage.

Use the + button to add additional tiers.

**Example: FTD-Based Tier Structure**

| Tier   | Qualifying FTDs | Revenue Share |
| ------ | --------------- | ------------- |
| Tier 1 | 0–10            | 25%           |
| Tier 2 | 11–50           | 30%           |
| Tier 3 | 51 onwards      | 35%           |

The commission rate changes according to the tier reached under the configured structure.

For revenue-based tiers, consider including a sufficiently low negative starting threshold to accommodate periods of negative revenue.

Important:&#x20;

* Revenue share under the tiered structure is calculated daily.&#x20;
* Program-level tiered commissions are commonly used to ensure that new affiliates receive a baseline commission structure upon registration.

#### 5. Cost Per Install (CPI)

CPI allows affiliates to earn a fixed amount for each qualifying install.

Enter the CPI Amount in the designated field.

You can also enable the Capping feature to limit the number of qualifying installs. Select either Month on Month or Lifetime and enter the applicable cap.

#### 6. Cost Per Lead (CPL)

CPL allows affiliates to earn a fixed amount for each qualifying lead or registration, depending on the configured criteria.

Configure the following:

* Criterion — Select Lead or Registration, where available.
* Currency — Select the applicable currency.
* CPL Amount — Enter the amount payable per qualifying lead or registration.

The Capping feature can also be used to limit the number of qualifying events under the selected period.

#### 7. Cost Per Click (CPC)

CPC allows affiliates to earn a fixed amount for each qualifying click.

Select the applicable currency and enter the CPC Amount.

You can enable capping to limit the number of qualifying clicks on either a Month-on-Month or Lifetime basis.

#### 8. Tenancy Fee

The Tenancy Fee commission type allows you to configure a fixed fee for the selected payment cycle.

Select the applicable currency and enter the tenancy fee amount.

The configured fee applies to the entire payment cycle selected for the program rather than being calculated separately for each qualifying player or action.

#### Commission Notes

You can optionally add a description or internal note to the commission configuration.

Use this field to document the purpose of the commission or any relevant commercial terms.

Once all required fields have been completed, select Submit to create the commission.

### Edit an Existing Commission

To edit a commission, return to the All Commissions listing and select the relevant row.

Existing commissions can be edited when you are modifying the value of an already configured commission type. For example, you can change the Revenue Share percentage of an existing Revenue Share commission.

Where available, you can also choose whether the updated commission should apply to historical players associated with the relevant commission or campaign.

If you need to change the commission structure itself—for example, by adding CPA to an existing Revenue Share deal—you must end the existing commission by setting an appropriate end date and create a new commission with the required structure and effective date.

This preserves the distinction between the original commission arrangement and the revised commercial terms.

### 2. Pre-sets

The Pre-sets tab allows you to create and manage reusable commission configurations.

Pre-sets simplify commission setup by allowing frequently used commission structures to be saved and applied when creating new commissions.

#### Pre-sets Listing

The table displays:

* Pre-set ID — Unique identifier assigned to the pre-set.
* Level — Commission level for which the pre-set has been configured.
* Creation Date — Date on which the pre-set was created.
* Commission Details — Summary of the commission types and values included in the pre-set.

#### Add Pre-set

Select Add Pre-set in the top-right corner to create a new pre-set.

First, select the commission level for which the pre-set will be used. The form will then display the commission types available for that level.

Supported commission types include:

* Revenue Share
* CPA
* CPL
* Tiered Structure
* CPI
* CPC
* Tenancy Fee

Configure the required commission types, triggers, and values using the same fields available when creating a standard commission.

Once complete, select Submit to save the pre-set.

The saved pre-set will appear in the Pre-sets listing (when you check the Select Pre-set box in the Add Commission page) and can subsequently be selected when creating a commission at the corresponding level.
